—— Mechanical Engineering Industry;
—— Pump and Vale Industry;
—— Electronic Industry;
—— Chemical Industry;
—— New Energy Industry;
—— Automobile Industry;
Performance | Test Method | Unit | NAG | NAV |
|
/ |
|
||
Density | ISO 1183-1 | |||
Tensile Strength | ISO 527-2 | MPa | ≥105 |
|
Tensile Modulus |
|
|
||
Elongation At Break | ISO 527-2 | ≥15 | ≥25 | |
Notched Charpy Impact Strength | ISO 179 | KJ/m² | ≥5.6 | ≥4.5 |
|
ISO 178 |
|
≥160 | ≥165 |
|
GPa | ≥4.0 |
|
|
Rockwell Hardness |
|
HRM | ≥100 | ≥100 |
Thermal Conductivity | ISO 8302 | W/ (m•K) | ≤0.5 | |
Coefficient of Linear Thermal |
ISO 11359-2 | 10-6/K | ≤65 |
|
|
UL 746B | ℃ | 240 | 240 |
Heat Deflection Temperature |
|
|
|
|
Water Absorption (23℃、Water、24h) |
ISO 62 | % | ≤0.05 | ≤0.05 |
|
UL 94 | / |
|
V-0 |
|
IEC 62631-3-1 | Ω•cm | 1011-1013 | 1011-1013 |
|
|
kV/mm | ≥15 | ≥15 |
|
IEC 60243-1 | 1 | 3.66 | 3.3 |
Dielectric Loss | 1 | 2.5*10-3 |
50%Acetamide, Formamide and Other Amide |
+ |
- | |
Acetone, Cyclohexanone, MEK and Other Ketones |
+ |
Liquid Freon |
- |
10%Ammonia, Cyclohexamine and Other Amines. |
+ |
Urea Solution |
+ |
Gasoline, Diesel, Fuel, Asphalt |
+ |
Lipiodol |
0 |
Benzene, Toluene and Other Aromatic hydrocarbons |
+ |
Potassium hydroxide solution |
|
Acids such as 10% Acetic acid, 10% Formic acid,Concentrated phosphoric acid, 10% Nitric acid, 10% Hydrochloric acid, 10% Sulfuric acid, etc. |
+ |
+ |
|
Dichloromethane |
+ |
||
10% Calcium chloride, 10% Calcium carbonate, 10%Sodium nitrate, 10% Sodium thiosulfate and Other Salts 10% Hydrochloric acid, 10% Sulfuric acid, etc. |
+ |
Nitrobenzene |
0 |
Phenol solution |
|||
96% Ethanol, Ethylene glycol, Glycerol, 40% Ethylene glycol solution, Methanol, Propanol and Other Alcohols |
+ |
Pyridine |
+ |
Salicylic acid |
- | ||
Hexane, Heptane, Octane, Isopropane and Other Alkanes |
+ |
SO2 |
+ |
30% Formaldehyde solution and other Aldehydes |
+ |
98% carbonate solution |
- |
10% Boric acid aqueous solution |
+ |
Saturated hydrogen sulfide solution |
+ |
0 |
Silicone oil |
+ |
|
Chloroform |
|
Styrene |
+ |
Dichloro heterocyclic hexane |
+ |
CCl4 |
+ |
Concentrated acetic acid | 0 |
THF |
+ |
Diethyl ether |
+ |
0 |
Flameless test [ppm] | Flame test [ppm] |
concentration [ppm] |
||||
After 90s |
|
|
|
After 90s | After 4Mins | |
CO | Smallest | 1 | 30 | 100 | 3000 | 3500 |
|
0 | 0 | 50 | 500 | ||
HCN | 0 | 0 |
|
100 | ||
H2S,SO2 | 0 | 0 | 0 | 0 | 50 | 100 |
NOx | 0 | 0 | 0 | 50 | 100 | |
HF | 0 |
|
0 | 50 |